The Characteristics and Applications of Ceramic Laser Fusion and Ceramic Laser Sintering

The aim of present study is to investigate the possible application of the ceramic parts which are fabricated with the process of Ceramic Laser Fusion or Ceramic Laser Sintering. The experimental results reveal: (1) CLF can lead to a reduction in the porosity of the ceramic part but also can induce micro-cracks. Therefore, this process cannot produce a part with the required strength by a post-process of infiltration; (2) CLS is capable of fabricating a ceramic part with high porosity. By adjusting the slurry formulation and varying the scanning energy, the open porosity can be over 90vol% of the total porosity. After a post-process of infiltration, the density can be increased to 95%; therefore, CLS can apply to produce a part with high strength. Because the high open porosity leads to a good permeability, the process of CLS is suitable for the fabrication of ceramic shell mold.Mechanical Engineerin

Nonlinear Thermal Transport with Inertia in Thin Wires: Thermal Fronts and Steady States

In a series of papers we have obtained results for nonlinear heat transport when thin wires exchange heat non-linearly with the surroundings, with particular attention to propagating solitons. Here we obtain and discuss new results related to the propagation of nonlinear heat fronts and some conceptual aspects referring to the application of the second principle of thermodynamics to some nonlinear steady states related to non-propagating solitons

Alternative Vinen's equation and its extension to rotating counterflow superfluid turbulence

Two alternative Vinen's evolution equations for the vortex line density L in counterflow superfluid turbulence, are physically admissible and lead to analogous results in steady states. In Phys. Rev. B, 69, 094513 (2004) the most used of them was generalized to counterflow superfluid turbulence in rotating containers. Here, the analogous generalization for the alternative Vinen's equation is proposed. Both generalized Vinen's equations are compared with the experimental results, not only in steady-states but also in some unsteady situations. From this analysis follows that the solutions of the alternative Vinen's equation tend significantly faster to the corresponding final steady state values than the solutions of the usual Vinen's equation, and that the latter seems more suitable for the description of the experimental available data.Comment: 16 pages, 6 figures. Submitted for publicatio

Vortex length, vortex energy and fractal dimension of superfluid turbulence at very low temperature

By assuming a self-similar structure for Kelvin waves along vortex loops with successive smaller scale features, we model the fractal dimension of a superfluid vortex tangle in the zero temperature limit. Our model assumes that at each step the total energy of the vortices is conserved, but the total length can change. We obtain a relation between the fractal dimension and the exponent describing how the vortex energy per unit length changes with the length scale. This relation does not depend on the specific model, and shows that if smaller length scales make a decreasing relative contribution to the energy per unit length of vortex lines, the fractal dimension will be higher than unity. Finally, for the sake of more concrete illustration, we relate the fractal dimension of the tangle to the scaling exponents of amplitude and wavelength of a cascade of Kelvin waves.Comment: 12 pages, 1 figur

Attenuation and damping of electromagnetic fields: Influence of inertia and displacement current

New results for attenuation and damping of electromagnetic fields in rigid conducting media are derived under the conjugate influence of inertia due to charge carriers and displacement current. Inertial effects are described by a relaxation time for the current density in the realm of an extended Ohm's law. The classical notions of poor and good conductors are rediscussed on the basis of an effective electric conductivity, depending on both wave frequency and relaxation time. It is found that the attenuation for good conductors at high frequencies depends solely on the relaxation time. This means that the penetration depth saturates to a minimum value at sufficiently high frequencies. It is also shown that the actions of inertia and displacement current on damping of magnetic fields are opposite to each other. That could explain why the classical decay time of magnetic fields scales approximately as the diffusion time. At very small length scales, the decay time could be given either by the relaxation time or by a fraction of the diffusion time, depending whether inertia or displacement current, respectively, would prevail on magnetic diffusion.Comment: 21 pages, 1 figur

Vortex density waves and high-frequency second sound in superfluid turbulence hydrodynamics

In this paper we show that a recent hydrodynamical model of superfluid turbulence describes vortex density waves and their effects on the speed of high-frequency second sound. In this frequency regime, the vortex dynamics is not purely diffusive, as for low frequencies, but exhibits ondulatory features, whose influence on the second sound is here explored.Comment: 8 page

Diffuse-interface model for rapid phase transformations in nonequilibrium systems

A thermodynamic approach to rapid phase transformations within a diffuse interface in a binary system is developed. Assuming an extended set of independent thermodynamic variables formed by the union of the classic set of slow variables and the space of fast variables, we introduce finiteness of the heat and solute diffusive propagation at the finite speed of the interface advancing. To describe the transformation within the diffuse interface, we use the phase-field model which allows us to follow the steep but smooth change of phases within the width of diffuse interface. The governing equations of the phase-field model are derived for the hyperbolic model, model with memory, and for a model of nonlinear evolution of transformation within the diffuse-interface. The consistency of the model is proved by the condition of positive entropy production and by the outcomes of the fluctuation-dissipation theorem. A comparison with the existing sharp-interface and diffuse-interface versions of the model is given.Comment: 15 pages, regular article submitted to Physical Review

Knudsen Effect in a Nonequilibrium Gas

From the molecular dynamics simulation of a system of hard-core disks in which an equilibrium cell is connected with a nonequilibrium cell, it is confirmed that the pressure difference between two cells depends on the direction of the heat flux. From the boundary layer analysis, the velocity distribution function in the boundary layer is obtained. The agreement between the theoretical result and the numerical result is fairly good.Comment: 4pages, 4figure

Array concepts for solid-state and vacuum microelectronics millimeter-wave generation

The authors have proposed that the increasing demand for contact watt-level coherent sources in the millimeter- and submillimeter-wave region can be satisfied by fabricating two-dimensional grids loaded with oscillators and multipliers for quasi-optical coherent spatial combining of the outputs of large numbers of low-power devices. This was first demonstrated through the successful fabrication of monolithic arrays with 2000 Schottky diodes. Watt-level power outputs were obtained in doubling to 66 GHz. In addition, a simple transmission-line model was verified with a quasi-optical reflectometer that measured the array impedance. This multiplier array work is being extended to novel tripler configurations using blocking barrier devices. The technique has also been extended to oscillator configurations where the grid structure is loaded with negative-resistance devices. This was first demonstrated using Gunn devices. More recently, a 25-element MESFET grid oscillating at 10 GHz exhibited power combining and self-locking. Currently, this approach is being extended to a 100-element monolithic array of Gunn diodes. This same approach should be applicable to planar vacuum electron devices such as the submillimeter-wave BWO (backward wave oscillator) and vacuum FET